Source 1 Product Catalog 2017 Page 32 Air Conditioning & Heating Controls

AIR CONDITIONING & HEATING CONTROLS 32 Gas Heating Controls Honeywell Q340A Thermocouples POWER GENERATORS, THERMOCOUPLES, HOT SURFACE IGNITERS, FLAME SENSORS SOURCE 1 PART NO. LEAD LENGTH CONNECTION TYPE RESISTANCE MLP S1-Q340A1066 18 IN. 11/32 32 MALE CONNECTOR NUT 0.02 OHMS 22.55 S1-Q340A1074 24 IN. 11/32 32 MALE CONNECTOR NUT; PUSH IN KIT 0.02 OHMS 23.53 S1-Q340A1090 36 IN. 11/32 32 MALE CONNECTOR NUT 0.02 OHMS 25.76 S1-Q340A1108 48 IN. 11/32 32 MALE CONNECTOR NUT 0.02 OHMS 28.56 Q340A thermocouples sense the pilot flame on gas-fired heating systems. The pilot flame heats the tip of the thermocouple, producing a temperature differential between it and the base to generate a small amount of DC power, measured in millivolts. Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections. Male nut connector for Pilotstat safety control power units. Available in a variety of lead lengths. Adapter and Push In clip included Honeywell Pilot Burner for Natural Gas SOURCE 1 PART NO. MOUNTING BRACKET COMPRESSION FITTING LENGTH ORIFICE MLP S1-Q345A1305 B 0.78 IN. BCR-18 (0.018 IN.) 99.08 Nonprimary-aerated combination pilot burner and igniter. Used with the S86, S860, S8610, or S8670 in intermittent pilot systems. Features: Includes pilot burner with bracket, ceramic insulated Kanthal flame rod/spark igniter and ground strap. Specifications: Type of Gas: Natural Direction of Front Tip: (F) Front Tip Style: Single Aeration: Non-primary Leadwire Temperature Ratings (C): Max. at electrode tip: 968C Includes: 1/4 cc inlet fitting and mounting adapter Honeywell Q313 Thermopile Generator SOURCE 1 PART NO. LEAD LENGTH RESISTANCE ACCESSORIES INCLUDED MLP S1-Q313A1170 35 IN (889 MM) 2.89 OHMS PG9 ADAPTER AND 1/2 IN. THERMOPILE ATTACHING NUT 131.65 Q313 Thermopile Generator contains multiple thermocouples connected in series to increase the millivoltage output. The power generated is sufficient to operate an automatic millivolt gas control system, independent of any outside power source. Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections. Male nut connector for Pilotstat safety control power units. Available in a variety of lead lengths. Specifications: Voltage 750 mV Connection Type Spade Terminals Open Circuit Output (mV) 600 mV to 750 mV Temperature Ratings (F) Hot Junction 1400 F Temperature Ratings (C) Hot Junction 760 C Temperature Ratings (F) Cold Junction 780 F Temperature Ratings (C) Cold Junction 416 C Used With Q314, Q324, Q327, Q377, Q379, Q382 Pilot Burners Honeywell Q314 Pilot Burners SOURCE 1 PART NO. FRONT TIP DIRECTION MLP S1-Q314A4586 FRONT 86.75 S1-Q314A6102 FRONT 87.35 Non primary-aerated, insert orifice type pilot burner for main burner ignition. Used with Q309, Q340, Q340 thermocouples or Q313 thermopiles. Features: 1/4 Compression fitting. B style mounting bracket. Single tip style. Includes special mounting bracket with screws to convert B bracket to A bracket

Previous Page
Next Page