Source 1 Product Catalog 2017 Page 27 Refrigeration & Air Conditioning

27 REFRIGERANT CHARGING PRODUCTS Refrigerant Handling Equipment Cushion Clamps An industry standard universal clamp that mounts to standard strut. Steel with electro-dichromate nish to resist corrosion. The lock nut has a nylon insert for a positive lock. The polymeric grommet withstands temperatures from -25C to 125C and resists the effects of most oils, chemicals, and industrial cleaning compounds. SOURCE 1 PART NO DESCRIPTION STD. PACK MLP S1-538-1/2 CUSHION CLAMP - 1/2" 25/BOX 5.54 S1-538-1/4 CUSHION CLAMP - 1/4" 25/BOX 5.54 S1-538-1-1/8 CUSHION CLAMP - 1-1/8" 10/BOX 8.25 S1-538-1-3/8 CUSHION CLAMP - 1-3/8" 10/BOX 9.96 S1-538-1-5/8 CUSHION CLAMP - 1-5/8" 10/BOX 13.04 S1-538-2-1/8 CUSHION CLAMP - 2-1/8" 10/BOX 25.25 S1-538-2-5/8 CUSHION CLAMP - 2-5/8" 10/BOX 27.32 S1-538-2-5/8-JP CUSHION CLAMP - 2-5/8" 5/BOX 159.82 S1-538-3/4 CUSHION CLAMP - 3/4" 25/BOX 6.54 S1-538-3/8 CUSHION CLAMP - 3/8" 25/BOX 5.57 S1-538-3-1/8 CUSHION CLAMP - 3-1/8" 10/BOX 35.61 S1-538-3-1/8-JP CUSHION CLAMP - 3-1/8" 5/BOX 185.25 S1-538-3-5/8 CUSHION CLAMP - 3-5/8" 10/BOX 60.04 S1-538-3-5/8-JP CUSHION CLAMP - 3-5/8" 5/BOX 188.86 S1-538-4-1/8 CUSHION CLAMP - 4-1/8" 10/BOX 79.57 S1-538-4-1/8-JP CUSHION CLAMP - 4-1/8" 5/BOX 415.29 S1-538-5/8 CUSHION CLAMP - 5/8" 25/BOX 5.61 S1-538-7/8 CUSHION CLAMP - 7/8" 25/BOX 7.11 *Sold by box/MLP per each. Insta-Charge Faster, safer and more economical method for charging LIQUID refrigerant through the low pressure side of an air conditioning or refrigeration system, without damaging the compressor. Insta-Charge's unique internal restrictor reduces liquid ow to a level below the capacity of the compressor. Converts liquid refrigerant to a saturated vapor for fast entry. Insta-Charge connects directly to the refrigerant can or cylinder valve. Adds liquid tracing dye faster. Eliminates heating of refrigerant cylinder. Made of light weight aluminum. Sold at a fraction of the cost of other fast charging devices. SOURCE 1 PART NO. DESCRIPTION MLP S1-RC-1 INSTA-CHARGE 17.02 Adapter SOURCE 1 PART NO. DESCRIPTION MLP S1-MSA-45 ADAPTER, 1/4" MALE FLARE x 20 UNF FEMALE 22.14 1/4in. Male Flare x 1/2in. - 20 UNF Female Insta-Charge Fa co red for Eli cha SOURCE Adapter SOURCE 1 S1 MS Refrigerant Recovery Cylinders DOT Classi ed for recovery, recycling, service and reclaim. Liquid and vapor valves ("Y" valve or separate valve con gurations) are installed in all cylinders. Painted yellow/gray per ARI guidelines. Float switches have 3-pin Bra Harrison connectors. Caution: Never over ll cylinders. Maximum refrigerant capacity is limited to 80% of the water capacity of the cylinder in lbs. (see table below). DOT requires cylinders to be retested every ve years. Some recovery equipment uses weight scales to cut off refrigerant ll at 80% of capacity. Be sure cylinder tare weight is correct for this type of equipment. DOT Classication Example: 4BA400: 400 psi working pressure; 800 psi test pressure (double the working pressure); 1,600 psi minimum burst pressure (double the test pressure). Pressure relief/safety valve is set to release at between 75-100% of the test pressure. For example, in the 4BA400 tanks which have a 800 psi test pressure, the relief valve opens at between 600 psi and 800 psi. SOURCE 1 PART NO DESCRIPTION DOT CLASS 3/4" NPT PLUG FLOAT SWITCH WATER CAP. TARE WT. MLP S1-02033 30 LB. 4BA400 YES NO 26.2 LBS. 17 LBS. 361.27 S1-02053 50 LB. 4BA400 YES NO 47.7 LBS. 28 LBS. 391.47 S1-02055 50 LB. 4BA400 NO YES 47.7 LBS. 28 LBS. 647.86 S1-02100 100 LB. 4BW400 NO 123 LBS. 48 LBS. 1008.07 S1-02255 250 LB. 4BW260 YES NO 239 LBS. 85 LBS. 1319.79 Cushion Clamps An ind corros -25C SOURCE 1 PAR

Previous Page
Next Page