Source 1 Product Catalog 2017 Page 150 Ventilation & Indoor Air Quality

150 Insulation Fasteners STIK-ON INSULATION FASTENERS SOURCE 1 PART NO. DESCRIPTION MLP $ S1-308161 STIK-ONS, 3/4", 100 PCS 33.46 S1-308166 STIK-ONS, 3/4", 1000 PCS 345.25 S1-308167 STIK-ONS, 1 1/4", 1000 PCS 354.25 S1-308168 STIK-ONS, 1 3/4", 1000 PCS 363.25 STIK-ONS are 14-gauge steel insulation pins that are permanently staked through 2" x 2" galvanized steel base plates. A pressure sensitive adhesive backing provides a permanent bond between the STIK-ONS and ductwork. Clips included. STIK-ONS can be used to hold all low- and medium-density insulation and insulation board where the temperature will not exceed180F (82C.). Product Technical Data: Temperature Range: -30F (-35C) - 180F (82C) Application Temperature: above 40F (4C) Holding Power: 3 lbs per unit Approximate Shelf Life: 2 years @ 70F (21C) GRIP-ON INSULATION FASTENERS SOURCE 1 PART NO. DESCRIPTION CODE MLP $ S1-308229 GRIP-ONS 1/2", 5000 PCS GOB-50 725.43 S1-308233 GRIP-ONS, 1", 1 LD, 5000 PCS GOB-100LD 638.93 GRIP-ON Pins are made with nail tips that have a double claw that grabs more metal. The hardened tip penetrates sheet metal, yet is soft enough to bend at the right moment of impact with an underlying harder surface. The points will not shatter. WELD-ON INSULATION FASTENERS, CUP HEAD SOURCE 1 PART NO. DESCRIPTION CODE MLP $ S1-308134 WELD-ONS, FLAT HEAD, 1/2", 1000 PCS FWT-50 93.86 S1-308135 WELD-ONS, FLAT HEAD, 3/4", 1000 PCS FWT-75 100.50 S1-308136 WELD-ONS, FLAT HEAD, 1", 1000 PCS FWT-100 112.46 S1-308141 WELD-ONS, FLAT HEAD, 1/2" 5000 PCS FWB-50 445.96 S1-308142 WELD-ONS, FLAT HEAD, 3/4", 5000 PCS FWB-75 479.68 S1-308143 WELD-ONS, FLAT HEAD, 1", 5000 PCS FWB-100 541.54 WELD-ONS are manufactured with consistently sharp points to ensure positive contact with the sheet metal to which they are to be welded. Produced from special carbon alloy steel, the point of the welding pin is hardened in a unique cold form process. This hardens the points, giving them a steel temper, which, unlike other welding pins, will not blunt or flatten when applied. The sharper point of contact results in a better weld and creates fewer sparks that ignite adhesives or burn substrates. WELD-ONS are easily applied using any conventional portable or automatic resistance welding unit. Cup-style washer is designed to sufficiently depress the insulation surface without tearing it. WELD-ON INSULATION FASTENERS, FLAT HEAD WELD-ONS are manufactured with consistently sharp points to ensure positive contact with the sheet metal to which they are to be welded. Produced from special carbon alloy steel, the point of the welding pin is hardened in a unique cold form process. This hardens the points, giving them a steel temper, which, unlike other welding pins, will not blunt or flatten when applied. The sharper point of contact results in a better weld and creates fewer sparks that ignite adhesives or burn substrates. SOURCE 1 PART NO. DESCRIPTION CODE MLP $ S1-308122 WELD-ONS, CUP HEAD, 1-1/8", 4000 PCS DWB-118 454.46

Previous Page
Next Page